16mm Scale
All 3D models below are available in 16mm Scale.
Please get in touch if you have any other scale or item requirements.
If you would like an item here that isn't in your preferred scale then please let me know as I may be able to produce it in another scale.
To see full details of each item, please click on the image below.
Mostyn Seven Van
£29.50 (plus £3.50 uk postage)
A 3d printed kit based on the original design by David Skertchly featured in the August 2020 (issue 312) Garden Rail magazine.
This model has been designed in conjunction with Dave Skertchly and the prototype built by him is the one shown in the photo.
The kit is 3d printed in white for you to paint with your choice of colour, no transfers are included.
A 3d printed kit based on the original design by David Skertchly featured in the August 2020 (issue 312) Garden Rail magazine.
This model has been designed in conjunction with Dave Skertchly and the prototype built by him is the one shown in the photo.
The kit is 3d printed in white for you to paint with your choice of colour, no transfers are included.
Mostyn Seven Pick up (flat back)
£30.50 (plus £3.50 uk postage)
A 3d printed kit based on the original design by David Skertchly featured in the August 2020 (issue 312) Garden Rail magazine.
This model has been designed in conjunction with Dave Skertchly and the prototype built by him is the one shown in the photo.
The kit is 3d printed in white for you to paint with your choice of colour, no transfers are included.
A 3d printed kit based on the original design by David Skertchly featured in the August 2020 (issue 312) Garden Rail magazine.
This model has been designed in conjunction with Dave Skertchly and the prototype built by him is the one shown in the photo.
The kit is 3d printed in white for you to paint with your choice of colour, no transfers are included.
Mostyn Seven Pickup (with sides)
£31.50 (plus £3.50 uk postage)
A 3d printed kit based on the original design by David Skertchly featured in the August 2020 (issue 312) Garden Rail magazine.
This model has been designed in conjunction with Dave Skertchly and the prototype built by him is the one shown in the photo.
The kit is 3d printed in white for you to paint with your choice of colour, no transfers are included.
A 3d printed kit based on the original design by David Skertchly featured in the August 2020 (issue 312) Garden Rail magazine.
This model has been designed in conjunction with Dave Skertchly and the prototype built by him is the one shown in the photo.
The kit is 3d printed in white for you to paint with your choice of colour, no transfers are included.
Mostyn Seven Hearse or milk/produce van
£32.50 (plus £3.50 uk postage)
A 3d printed kit based on the original design by David Skertchly featured in the August 2020 (issue 312) Garden Rail magazine.
This model has been designed in conjunction with Dave Skertchly and the prototype built by him is the one shown in the photo.
The kit is 3d printed in white for you to paint with your choice of colour, no transfers are included.
A 3d printed kit based on the original design by David Skertchly featured in the August 2020 (issue 312) Garden Rail magazine.
This model has been designed in conjunction with Dave Skertchly and the prototype built by him is the one shown in the photo.
The kit is 3d printed in white for you to paint with your choice of colour, no transfers are included.
2 rail fence & posts
Fences £4, posts £1
Fences 300mm long and 80mm high above ground. Posts have a 6mm round section on the lower end for below ground.
Made from tough white plastic which is suitable for outside use
Fences 300mm long and 80mm high above ground. Posts have a 6mm round section on the lower end for below ground.
Made from tough white plastic which is suitable for outside use
Stillages £8.50 Pair
Pair of stillages.
Each stillage comes as a kit of 5 parts which are easily assembled.
Printed in white (blue one painted for example only)
Figure not included.
Each stillage comes as a kit of 5 parts which are easily assembled.
Printed in white (blue one painted for example only)
Figure not included.
10' Shipping Container
£17.50 each
Tin Hut - Brick Front
£5 each
Buy roof sections seperately to build your hut to the required length.
Dims (mm) 120h x 180w x 5d
Buy roof sections seperately to build your hut to the required length.
Dims (mm) 120h x 180w x 5d
Tin Hut - Brick Back
£5 ach
Buy roof sections seperately to build your hut to the required length.
Dims (mm):120h x 180w x 5d
Buy roof sections seperately to build your hut to the required length.
Dims (mm):120h x 180w x 5d
Tin Hut - Timber Front
£5 Each
buy roof sections seperately to build your hut to the required length.
Dims (mm) 120h x 180w x 5d
buy roof sections seperately to build your hut to the required length.
Dims (mm) 120h x 180w x 5d
Tin Hut - Timber Back
£5 Each
buy roof sctions seperatley to build your hut to the required length.
Dims (mm):120h x 180w x 5d
buy roof sctions seperatley to build your hut to the required length.
Dims (mm):120h x 180w x 5d
Tin Hut Roof Section
£4.50 each
Each section approx 60mm/2.5" long
Buy as many as you require
Each section approx 60mm/2.5" long
Buy as many as you require
Oil Drum
£6 for 4
Dimensions (mm): 45h x 30 Dia
Dimensions (mm): 45h x 30 Dia
Wooden Doors
£10 Pair or Price according to size.
Doors shown are 170mm high and for an opening of 120mm wide.
Doors can be made to your required sizes, please enquire.
Each door comprises of a front and back which require glueing together.
Doors shown are 170mm high and for an opening of 120mm wide.
Doors can be made to your required sizes, please enquire.
Each door comprises of a front and back which require glueing together.