7/8" Scale
All 3D models below are available in 7/8" Scale.
Please get in touch if you have any other scale or item requirements.
If you would like an item here that isn't in your preferred scale then please let me know as I may be able to produce it in another scale.
To see full details of each item, please click on the image below.
Lamp Shades
£4.50 Each
Resin printed in grey with a 2mm hole through the centre which you can enlarge to suit your requirements.
Please see my other lamp parts (brackets and electrics box)
Photo courtesy Rob Bennett
Resin printed in grey with a 2mm hole through the centre which you can enlarge to suit your requirements.
Please see my other lamp parts (brackets and electrics box)
Photo courtesy Rob Bennett
Lamp Parts
Bracket £4.50
Electrics box £4.50
Electrics box has a 3mm hole in the top and bottom and a removable front cover to assist with wiring if required.
Please see my other item for the lamp shades.
Resin printed in grey plastic with a smooth finish.
Photo courtesy Rob Bennett
Electrics box £4.50
Electrics box has a 3mm hole in the top and bottom and a removable front cover to assist with wiring if required.
Please see my other item for the lamp shades.
Resin printed in grey plastic with a smooth finish.
Photo courtesy Rob Bennett
Schoma Loco £44.50
£44.50 each
Printed in white plastic (figure & track not included).
Designed to fit onto the Houstoun Gate Locomotive Works (HGLW) 4 wheel drive chassis (45mm and 32mm gauge).
Please allow 3-4 days for model to be printed.
A building, painting and weathering service is also available. For details contact Robert Bennett email: buffylanson@icloud.com
Photo courtesy Rob Bennett.
See gallery and construction gallery for additional photos
Printed in white plastic (figure & track not included).
Designed to fit onto the Houstoun Gate Locomotive Works (HGLW) 4 wheel drive chassis (45mm and 32mm gauge).
Please allow 3-4 days for model to be printed.
A building, painting and weathering service is also available. For details contact Robert Bennett email: buffylanson@icloud.com
Photo courtesy Rob Bennett.
See gallery and construction gallery for additional photos
Tipping Tub Wagon
£15.00 Each
Printed in white plastic (figure & track not included).
Available in either 32mm or 45mm gauge. Please state when ordering. A 3mm diameter axle will be required to suit required gauge (not included).
Alternative axle tubes are available for fitting other wheel sets with a 5mm diameter axle i.e. Slaters.
A building, painting and weathering service is also available. For details contact Robert Bennett email: buffylanson@icloud.com
See gallery and construction gallery for additional photos
Printed in white plastic (figure & track not included).
Available in either 32mm or 45mm gauge. Please state when ordering. A 3mm diameter axle will be required to suit required gauge (not included).
Alternative axle tubes are available for fitting other wheel sets with a 5mm diameter axle i.e. Slaters.
A building, painting and weathering service is also available. For details contact Robert Bennett email: buffylanson@icloud.com
See gallery and construction gallery for additional photos
Tin Hut Engine Shed
Various options available. Including:
- Side widows.
- Double doors also at rear.
- Window and personnel
door in rear wall.
- Solid brick rear wall
Printed in white plastic.
Example price for double doors at front, soild rear wall and no side windows £70.50
Photo courtesy Rob Bennett. Note: Rob has added the front light and corrogations to the sides of the side windows.
Please email or use contact form for more details.
- Side widows.
- Double doors also at rear.
- Window and personnel
door in rear wall.
- Solid brick rear wall
Printed in white plastic.
Example price for double doors at front, soild rear wall and no side windows £70.50
Photo courtesy Rob Bennett. Note: Rob has added the front light and corrogations to the sides of the side windows.
Please email or use contact form for more details.
Mostyn Seven Van
£39.50
Printed in white plastic.
Not often held in stock. Please allow 3-4 days for model to be printed
See gallery and construction gallery for additional photos
Printed in white plastic.
Not often held in stock. Please allow 3-4 days for model to be printed
See gallery and construction gallery for additional photos
Mostyn Seven Pickup (flat back)
£40.50 = £3.50 postage (uk)
Printed in white plastic.
Please allow 3-4 days for model to be printed.
Photo shows model with building in progress. Courtesy of Rob Bennett
See gallery and construction gallery for additional photos
Printed in white plastic.
Please allow 3-4 days for model to be printed.
Photo shows model with building in progress. Courtesy of Rob Bennett
See gallery and construction gallery for additional photos
Mostyn Seven Pickup (with sides)
£41.50 +£3.50 postage (uk)
Printed in white plastic.
Please allow 3-4 days for model to be printed
Photo shows model with some extra added (canvas and deluxe door handles) which are not in the kit. Courtesy of Rob Bennett
See gallery and construction gallery for additional photos
Printed in white plastic.
Please allow 3-4 days for model to be printed
Photo shows model with some extra added (canvas and deluxe door handles) which are not in the kit. Courtesy of Rob Bennett
See gallery and construction gallery for additional photos
Mostyn Seven Hearse or milk/produce van
£42.50 +£3.50 postage (uk)
Printed in white plastic.
Not often held in stock. Please allow 3-4 days for model to be printed
See gallery and construction gallery for additional photos
Printed in white plastic.
Not often held in stock. Please allow 3-4 days for model to be printed
See gallery and construction gallery for additional photos
Tin Hut - Brick Front Panel
£10.00 each
Can also be supplied without windows or just one window.
Buy roof sections seperately to build your hut to the desired length.
Can also be supplied without windows or just one window.
Buy roof sections seperately to build your hut to the desired length.
Chimney for Tin Hut
£14.50
Add a chimney to the rear wall of your tin hut.
Printed in white plastic and comes as a kit of 5 parts.
Hut roof will need to be modified to allow fitting of chimney.
Add a chimney to the rear wall of your tin hut.
Printed in white plastic and comes as a kit of 5 parts.
Hut roof will need to be modified to allow fitting of chimney.
Tin Hut - Brick Back Panel
£10.00 each
Can also be supplied without window.
Buy roof sections seperately to build your hut to the desired length.
Can also be supplied without window.
Buy roof sections seperately to build your hut to the desired length.
Tin Hut - Roof Section
£6.50 each
Each roof section measure approx 3"/75mm long
Order as many as you require
Each roof section measure approx 3"/75mm long
Order as many as you require
Wooden Doors
£10 Pair or Price according to size.
Doors shown are 170mm high and for an opening of 120mm wide.
Doors can be made to your required sizes, please enquire.
Each door comprises of a front and back which require glueing together.
Doors shown are 170mm high and for an opening of 120mm wide.
Doors can be made to your required sizes, please enquire.
Each door comprises of a front and back which require glueing together.
Oil Drum
£4.00 each
Dims (mm): 64h x 41 Dia
Dims (mm): 64h x 41 Dia